The above tank was produced using a high grade Isophthalic Resin to provide the required resistance to chemical toilet waste on a Caravan Park in Cornwall.

Synergy manufactures a wide range of tanks to suit many different types of application.

So please contact us with your storage tank requirements.

Proud to be an independent British Manufacturing Company.

The post Synergy Robusta 4600 Litre Low Profile Chemical Storage Tank appeared first on Synergy WTP.

An NSB 8 was supplied to serve the front Car Park, along with a NSB 3 to service the loading bay to the rear of the store. 

The developers were working to a very tight schedule to ensure the store opened on Good Friday 2013. We at Synergy feel we played our part in supplying quality products on time, and on budget. 

The Separators supplied were from ACO Q-Ceptor range. Synergy are distributors for this superb portfolio of Oil Separators. We offer a full national delivery service from our premises in Bridgwater.

The post Supplying two Bypass Oil Separators for the new Range store in Bridgwater appeared first on Synergy WTP.

Synergy manufactured and fitted the extended risers to provide for the deeper invert depth of 850mm, providing a “flush with ground” unobtrusive installation.

The system was delivered to site on a timed delivery using specialist transport. Thus enabled the installing construction company to install the tank, and backfill the installation in a single day.

The Sewage Treatment Plant installed, with just the finishing touches left to complete.

The post Project for Devonshire County Council appeared first on Synergy WTP.

1. Flow (Hydraulic Load) expressed in Litres.
2. Organic Load (BOD) expressed in mg/Litre.
3. Ammonia (NH3) expressed in mg/Litre.

Current UK loadings are 1 Pe = 180 L/ Day Flow, 60mg/L BOD, & 8mg/L NH3.

We are happy to size any application for enquirers using the industry standard: -

British Water Document: Flows and Loads – 3.

Flows and Loads-3 states that a 3 Bedroom residential property should be sized at a minimum of 5 Pe. For more than 3 Bedroom add 1 Pe for each additional bedroom E.g. a single 4 x Bedroom house = 6 Pe (5+1) a single 5 x Bedroom = 7 Pe (5+2) etc.

Below we list the standard sizes of Package Sewage Treatment Plants available from Synergy Wastewater Treatment Products.

• 6 Pe will serve up to a 4 Bedroom Property.
• 8 Pe will serve a 5 or 6 Bedroom Property.
• 9 Pe will serve up to a 7 Bedroom Property.
• 10 Pe will serve up to 2 x No. 3 Bedroom Properties or one 8 Bed property.
• 12 Pe will serve up to 2 x No. 4 Bedroom Properties.
• 18 Pe will serve up to 4 x No. 3 Bedroom Properties.
• 24 Pe will serve up to 5 x No. 3 Bedroom Properties.
• 30 Pe will serve up to 5 x No. 4 Bedroom Properties.
• 36 Pe will serve up to 6 x No. 4 Bedroom Properties.
• 42 Pe will serve up to 7 x No. 4 Bedroom Properties.
• 50 Pe will serve up to 10 x No. 4 Bedroom Properties.

All of the above are available with Gravity or Pumped Outlets, for use where the discharge point is at a higher level.

Obviously there are many combinations of properties with differing numbers of bedrooms, but we hope the above table gives an insight as to what is readily available as standard off the shelf products.

Please contact us with your requirements; we would be delighted to prepare a fully costed proposal, accompanied with a detailed design loading chart for your consideration.

Synergy Wastewater Treatment Products.

E&OE

The post Package Sewage Treatment Plant Selection Guide appeared first on Synergy WTP.

This does not always mean the number of actual persons to be served i.e. 10 People working in an office, is a vastly different to 10 Senior citizens in an Old Peoples Home.

Sizing for Domestic Septic Tanks.

For ‘domestic’ Septic Tank sizing take the Pe x 180 Litres + 2000 Litres.

Example 4 Pe x 180 + 2000 = 2720 Litres. This is the minimum capacity Septic Tank that may be installed on a domestic residence to comply with Building Regulations.

The British Water Document, Flows and Loads – 3 states the following:-

A house with 3 bedrooms = minimum of 5 Pe. Add a further 1 Pe for each additional bedroom i.e. 4 bedrooms = minimum 6 Pe (5+1) 5 bedrooms = minimum 7Pe (5+2)

Synergy Robusta Spherical Septic Tanks are available in the following capacities:-

2800 Litre up to 4   Pe i.e. a 2 bedroom domestic property.

3800 Litre up to 10 Pe i.e. a 8 bedroom Property, or 2 x 3 bedroom Properties.

4600 Litre up to 14 Pe i.e. a 12 bedroom property or 2 x 4 bedroom, or 3 x 3 bedrooms.

Synergy also offers a range of shallow dig Septic Tanks i.e.:-

Synergy Robusta Low Profile Septic Tanks.

These are available in three capacities:-

P4 to serve a 2 x bedroom property
P9 to serve up to a 7 x bedroom property
P16 to serve up to 2 x 4 bedroom + 1 x 3 bedroom properties.

The Robusta Low Profile Septic Tanks are suitable for sites that may have difficult ground conditions, or where access is only available with a Mini Digger for example.

The additional benefits of these tanks is they are suitable for granular backfill surround (Dry sites Only) also they have filtered outlets which further treats the effluent reducing the Suspended Solids content in the final effluent extending both the life, and performance of the soakaway.

All Synergy Robusta Septic Tanks have been independently tested and approved to EN12566-1. Additionally these products are CE marked confirming our commitment and investment in providing a quality product. Synergy the choice of the Professional Installer.

Synergy Wastewater Treatment Products.

E&OE

The post Septic Tank Selection and Sizing appeared first on Synergy WTP.

Click here to see the Robusta Biological Aerated Super Septic Tank

The post Robusta Biological Aerated Super Septic Tank appeared first on Synergy WTP.

Synergy would like to thank both its customers, and suppliers for the support received. Profit generated within the business will be reinvested in product development and manufacturing efficiencies to enable the company to build on the success achieved to date.

The post Increase in sales exceeding 30% appeared first on Synergy WTP.

These tanks offer a shallow dig excavation over coming difficult ground conditions which appear to be ever more common place. What ever your Off Mains drainage requirement is, make Synergy your first call. The choice of the Professional Installer!

 Synergy Robusta Low Profile Septic Tank.

Made in Gt. Britain, The only GRP Low Profile Septic Tank to have EN12566-1 Certification. 

Models: - P4 (To serve Two Bedroom Properties) P9 (To serve up to a single Seven Bedroom Property). P16 (To serve up to 2 x Four Bed + 1 x Three Bedroom Property).

Advantages.

• British made by Independent family business with 40 years experience.
• Tested & Approved to EN12566-1:2000/A1:2003.
• Supplied with Filtered Outlet as standard for higher quality effluent.
• CE Marked for use throughout Europe.
• Shallow Dig! Inlet to base dimension only:- P4 = 1150mm P9-P16 =1400mm
• Supplied with risers pre fitted for 500mm Inlet Invert. (Can be trimmed on site for shallower invert depths).
• Can be supplied with additional riser shafts for deeper installation if required.
• Supplied with Holding Down feet as standard.
• Suitable for Granular Backfill on dry sites.
• Supplied with 2 x No. Locking Covers & Frames.
• Galvanised Lifting eyes as standard.
• Totally smooth internal tank wall for more efficient operation/cleansing.
• National Delivery.

 Synergy Wastewater Treatment Products
E&OE

The post Robusta Low Profile Septic Tanks appeared first on Synergy WTP.

If you need any type of water treatment equipment such as:

• Sewage Treatment Plants
• Bypass Separators
• Full Retention Separators
• Septic Tanks
• Storage Tanks
• Cesspools Tanks
• Rainwater Harvesting Systems
• Package Pump Stations
• Water Separators
• Oil Separators
• Silt Traps
• Grease Traps
• Storm Water Attenuation Tanks
• Dirty Water Settlement Tanks
• Silage Effluent Storage Tanks
• Above Ground Storage Tanks

Please give us a call on 01278 671927 or email us here using our contact form.

The post Sewage Treatment Plants Somerset appeared first on Synergy WTP.

Latest government guidelines state that each person should only use up to 80 litres per day of potable water by 2030; this is nearly a 50% reduction on today’s usage levels. This means that solutions such as a rainwater harvesting system can play a vital role in reducing our usage as domestic households. A similar motivation applies to commercial premises as well.

Use of the Stormbreaker system can be an excellent contributor, and in addition, there are several operational benefits to the system.

If you’re a Contractor…

• A pre-assembled system
• Allows a shallower 1.6m dig
• There’s no fall from inlet to outlet

If you’re a Householder…

• Expect up to a 50% reduction in potable water use
• Your rainwater is softwater
• An outside 4 bar pressure washer

Graham Gibbs at Fernco Environmental comments; ‘We’re delighted to have Synergy WTP on board as a distributor of our system. We’ll always be at hand for technical support and advice and will also be there to support the end user in their pursuit to economise on their usage of potable water’

For more information on the system, and to see a case study of the product in action, please visit the Fernco Environmental website – www.ferncoenvironmental.com

The post Synergy Water Treatment Products to supply Fernco Environmental’s RWH system appeared first on Synergy WTP.