May 20, 2013
Synergy Wastewater Treatment Products were nominated by the Main Contractor to supply two Bypass Oil Separators for the new Range store in Bridgwater.
An NSB 8 was supplied to serve the front Car Park, along with a NSB 3 to service the loading bay to the rear of the store.
The developers were working to a very tight schedule to ensure the store opened on Good Friday 2013. We at Synergy feel we played our part in supplying quality products on time, and on budget.
The Separators supplied were from ACO Q-Ceptor range. Synergy are distributors for this superb portfolio of Oil Separators. We offer a full national delivery service from our premises in Bridgwater.
Category: News
March 8, 2013
Devonshire County Council appoints Synergy Wastewater Treatment Products to supply a 42Pe Sewage Treatment Plant to a rural school project in the County.
Synergy manufactured and fitted the extended risers to provide for the deeper invert depth of 850mm, providing a “flush with ground” unobtrusive installation.
(more…)
Category: News
March 7, 2013
Sewage Treatment Plants are sized using three criteria as follows; these are expressed as Pe meaning Population Equivalent.
- Flow (Hydraulic Load) expressed in Litres.
- Organic Load (BOD) expressed in mg/Litre.
- Ammonia (NH3) expressed in mg/Litre.
Current UK loadings are 1 Pe = 180 L/ Day Flow, 60mg/L BOD, & 8mg/L NH3.
(more…)
Category: News
When sizing Septic Tanks the industry refers to P or Pe meaning Population Equivalent.
This does not always mean the number of actual persons to be served i.e. 10 People working in an office, is a vastly different to 10 Senior citizens in an Old Peoples Home.
(more…)
Category: News
February 25, 2013
Synergy Wastewater Treatment Products are pleased to announce the launch of their latest product the BASS1, a hybrid of the successful Robusta Low Profile Septic Tank.
Click here to see the Robusta Biological Aerated Super Septic Tank
Category: News
February 11, 2013
As of 31st. January 2013 Synergy Wastewater Products are proud to announce that for the third successive year, the company has achieved an increase in sales exceeding 30%. As an independent family owned business trading in difficult times we are delighted with these results.
Synergy would like to thank both its customers, and suppliers for the support received. Profit generated within the business will be reinvested in product development and manufacturing efficiencies to enable the company to build on the success achieved to date.
Category: News
January 8, 2013
During 2012 we experienced an ever increasing demand for an easily installed GRP Low Profile Septic Tank. As a result of this we are delighted to offer our EN12566-1 Tested & Approved Robusta Low Profile range. These tanks have many advantages over and above some of the other products available, please see the following details. In addition to The EN12566-1 Standard these tanks are CE marked for use throughout Europe.
(more…)
Category: News
December 17, 2012
We are specialists in Sewage Treatment Plants and are located in the Somerset area.
If you need any type of water treatment equipment such as: (more…)
Category: News
October 10, 2012
After several meetings with Graham Gibbs, National Sales Manager at Fernco Environmental, we’re delighted to announce that we’ll now be supplying the Stormbreaker Rainwater Harvesting system, from Fernco Environmental.
Latest government guidelines state that each person should only use up to 80 litres per day of potable water by 2030; this is nearly a 50% reduction on today’s usage levels. This means that solutions such as a rainwater harvesting system can play a vital role in reducing our usage as domestic households. A similar motivation applies to commercial premises as well.
(more…)
Category: News
September 4, 2012
Whilst Synergy Wastewater Treatment Products is a manufacturing company producing it’s own range of Septic Tanks, Pump Stations, Grease Traps and more. When it comes to Sewage Treatment Plants we do not manufacture our own products.
(more…)
Category: News
